公告:欢迎来到丹东奥龙射线仪器集团pk10网站制作
您现在的位置:pk10网站制作 > 产品中心 > X射线晶体定向仪 > X射线晶体粘料定向仪  > 晶棒参考面X射线定向仪

产品名称:晶棒参考面X射线定向仪

产品型号:ALL-CKMD400型

产品报价:

产品特点:晶棒参考面X射线定向仪的结构与功能介绍:基准平台:此件固定在主机的台面板上,测量时做水平基准面,基准平台的右侧为定位面,左侧为夹紧装置,左侧的夹紧装置上有夹紧螺钉,设备配套的夹具在测量时放于基准平台上。

ALL-CKMD400型晶棒参考面X射线定向仪

ALL-CKMD 400 MODEL X-RAY CRYSTAL ORIENTATION INSTRUMENT BY THE REFERENCE PLANE

 

晶棒参考面X射线定向仪产品特点

  测量晶棒夹具的结构与功能介绍:

基准平台:此件固定在主机的台面板上,测量时做水平基准面,基准平台的右侧为定位面,左侧为夹紧装置,左侧的夹紧装置上有夹紧螺钉,设备配套的夹具在测量时放于基准平台上。

  测量<A>面:晶体主参考面<A>面定向:可测量晶棒直径为2、4、6英寸,<A>面的θ角:18.917°(18°5500)(或按客户需要做C向、R)。

①仪器的校准:用标准晶棒校准仪器。晶向<A>的θ角:18.917° (18°5500)

②将装有晶棒的夹具,清理洁净后放到仪器的基准平台上,调整前后位置,使X光能够照射到晶棒的外圆柱面上,旋转基准平台左侧的夹紧螺钉,把紧。打开X射线光闸,使待测量晶棒在夹具内慢慢转动,寻测峰值。当μA表针为zui佳状态时(即为zui大值时),保证晶棒不动,夹紧晶棒。

③将夹具从定向仪下移出,转到磨床上磨削平面。

④自动升降测试。

 

Features

Construction and function of crystal clip

Benchmark platforms: it is fixed on the host machine panel, used for the horizontal platform when testing the sample.The right side of the base platform for locating surface, left platform for clamping .The clip has the screw clamping device.Please put the clip on the horizontal platform when begin to have a testing .

Measuring the < A > direction : crystal main reference < A > flat orientation: it can measure crystal rods for 2, 4, 6 inch in diameter, <A> direction θ angle:18.917°(18 ° 55 '00 ") (or according to customers requirement ,use the C or R direction).

The calibration of instruments: use a standard crystal rod calibration instrument. Crystal (A) θ Angle :18.917 ° (18 ° 55 00 ")

After cleaning up the clip ,and put it on the horizontal platform for adjusting its position ,in order to enable the x-ray exposure on the outside skin of the cylinder crystal ,and fix the screw on the left of rotated horizontal.Open the X-ray shutter ,and let the crystal rotating slow to find the peak .When the μA meter find the best status (i.e the max.value) ,make sure the crystal being static,and fix it tightly.

Unload the clip from the instrument ,and put it on the grinding plane of the grinding machine.

Auto lifting test.

 

晶棒参考面X射线定向仪技术指标

●输入电源:单相交流220V,50Hz,0.25kW。

X射线管:铜靶,风扇冷却,阳极接地。

●zui大管电压电流:30kV,5mA连续可调,使用2.0mA以上,

                  有可能损坏X光管并加大辐射:。  

●探测器:计数器。工作电压zui高为DC1000V;或闪烁探测器,

                   工作电压zui高为DC1200V。

●时间常数:1(快)、2(慢)两档。

●测角角度:θ=18.917°(18°5500″)

●主光闸:自动。

●显示板:射线强度表。

●外型尺寸:1132(长)×642(宽)×1460(高)mm

●重量:200kg

 

Technical Parameters

Input power: Single phase with AC 220V,50Hz,0.25kW

X-ray tube : Cu target ,cooled by fan ,and anode earth

Max.tube voltage and current :30kV ,5mA ,being continued adjustment .If using the current is more than 2.0mA ,which may be damaged the X-ray tube insert and enlarge the radiative harm

Detector: counter . The max. working voltage is DC1000V;Or scintillation counter,the max.working voltage is DC1200V

Time parameter:1(fast)/2(low)

Testing angel :θ=18.917°(18°5500″)

Main shutter:auto

Displaying board: radiative rose chart

Size:1132L)×642W)×1460Hmm

Weight:200kg

 

 

 如果你对ALL-CKMD400型晶棒参考面X射线定向仪感兴趣,想了解更详细的产品信息,填写下表直接与厂家联系:

留言框

  • 产品:

  • 留言内容:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 详细地址:

  • 省份:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
联系方式
名称:丹东奥龙射线仪器集团pk10网站制作
地址:辽宁省丹东市振兴区爱河大街66号
手机:18341531533
传真:86-0415-3458688
联系人:王经理
E-mail:wyf15942583033@126.com